[c-nsp] WS-X6748-GE-TE and MDI-X in IOS?

[Peter Rathlev]

Hi,

Does anybody know if the WS-X6748-GE-TX does MDI-X autosensing when
running native IOS on Sup720?

I can't seem to find anything decisive about the WS-X6748-GE-TX and IOS,
but I can find references to CatOS/WS-X6748-GE-TX and MDIX and to the
WS-X6548-RJ-45.

Catalyst 6500 Series Switch Module Guide
"The WS-X6548-RJ-45 module is auto-MDI/MDIX capable;"
http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080394e16.html#wp1050569
http://tinyurl.com/4n52cz

Catalyst 6500 Series Command Reference, 8.6
"With software release 8.2(1), auto-MDIX is also enabled on the
following modules:


•WS-X6748-GE-TX, Supervisor Engine 720 port 2 (RJ-45)"

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/command/reference/set_m_pi.html#wp1045648
http://tinyurl.com/3m52lb

The first page has info on the WS-X6748-GE-TX, but doesn't mention MDI-X
near the module information.

I don't have any spare WS-X6748-GE-TX right now, so I can't test it
other than in production. (Which I will have to do if nobody
knows... :-)

Thanks,
Peter