[c-nsp] Adding vlan 1 to vlan-group

Stig Johansen stig.johansen at ementor.no
Mon Aug 4 15:30:21 EDT 2008


Sure is.. it's called a cable, and runs from a port in your vlan 1 to a port in another vlan which you configure on your ACE-module. :)

Best regards,
Stig Meireles Johansen

-----Opprinnelig melding-----
Fra: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] På vegne av Teller, Robert
Sendt: 4. august 2008 17:49
Til: cisco-nsp at puck.nether.net
Emne: [c-nsp] Adding vlan 1 to vlan-group

Is there a configuration option that will allow me to add vlan 1 to a
vlan group to be used with an ace module? When I try to do it I am
receiving the following error message.

svclc vlan-group 111 1
Vlan 1 can not be a secure vlan


I am doing this for a temporary migration reasons.

#########################################################
The information contained in this e-mail and subsequent attachments may be privileged, 
confidential and protected from disclosure.  This transmission is intended for the sole 
use of the individual and entity to whom it is addressed.  If you are not the intended 
recipient, any dissemination, distribution or copying is strictly prohibited.  If you 
think that you have received this message in error, please e-mail the sender at the above 
e-mail address.
#########################################################

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list