[c-nsp] 2851 and full BGP

[Antal Gergely]

Jay Nakamura wrote:
> I have two 2851s connected to each other over gigabit Ethernet WAN.
> 
> Both have 1GB RAM and running 12.4(20)T advanced IP services.
> 
> Both routers are connected to our providers with full BGP feed.  That part
> works fine.
> 
> When I have the two 2851 try to send it's full route to each other, it gets
> to about 20,000 routes and the session resets.  Here is a debug output
> 
> Aug  8 09:48:30.099: BGP: x.x.x.x bad message length - 4097
> Aug  8 09:48:30.099: BGP: x.x.x.x went from Established to Closing
> 


ip mtu problem??
sh ip bgp nei xxx | i data segment??


-- 
Antal GERGELY

Backbone Network Department
IP Services
DIGI KFT
Budapest Vaci ut 35.
H-1134
Hungary


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 252 bytes
Desc: OpenPGP digital signature
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20080809/8b020b58/attachment.bin>