[c-nsp] CLIPS functionality for DHCP clients

Eugene Vedistchev scaner at global-one.by
Thu Aug 14 08:02:50 EDT 2008


Cisco ISG IOS feature can authenticate MAC in RADIUS. It exists in  IOS
images for 2800 and 2651XM
as well as 7200, 10k, 7600.

Eugene.

Rubens Kuhl Jr. wrote:
> I don't think there is any Cisco low-end solution to this; 7200, ASR,
> 10k and SCE are the platforms I think can do this one way or the
> other.
>
> Consider using Mikrotik or NoCat/NoDog solutions (http://nocat.net/).
>
>
> Rubens
>
>
>
> On Wed, Aug 13, 2008 at 5:23 PM, Kyle Johnson <vateatea at gmail.com> wrote:
>   
>> All-
>>
>> I'm trying to create a solution to allow for subscriber management
>> based on client PC MAC address. I see that Redback offers this "CLIPS"
>> (CPE mac address & RADIUS record) method of subscriber management but
>> Redback equipment is pretty pricey...
>>
>> Does anyone have a suggestion on a Cisco equivalent (PPPOE
>> functionality/sessions based off client MAC rather than PPPOE
>> config..) that will run on lower-end gear?
>>
>> Thanks-
>>
>> Kyle
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>     
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>   




More information about the cisco-nsp mailing list