[c-nsp] ip cef load sharing

[Rodney Dunn]

Try ip load-sharing per-packet on both egress interfaces.

On Fri, Aug 15, 2008 at 12:00:46PM -0500, Dan Letkeman wrote:
> Hello,
> 
> I have a 2621 router running 12.3(26) and I would like to setup load
> sharing to multiple adsl lines.  When I do a traceroute on the router
> it randomly picks a dsl line and seems to work fine.  But when I do
> traceroute tests from a workstation it always seems to take the same
> adsl line.  Is there something else I need to add to the configuration
> to make it pick random lines, or is there a timeout of some sorts
> before it will select the next ip route
> 
> Here is my config:
> 
> !
> interface FastEthernet0/0
>  ip address 10.1.10.1 255.255.255.0
>  duplex auto
>  speed auto
> !
> interface FastEthernet0/1
>  ip address 192.168.10.1 255.255.255.0
>  duplex auto
>  speed auto
> !
> ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 192.168.10.10
> ip route 0.0.0.0 0.0.0.0 192.168.10.11
> !
> 
> The two adsl modem/routers I have are 192.168.10.10, and 192.168.10.11
> 
> Thanks,
> Dan.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/