[c-nsp] T3 drop-insert scenario

[Jay Hennigan]

We have two locations connected with a DS-3 terminating on PA-T3+ cards 
on 7206VXR chassis, nowhere near fully loaded.  There is another need 
for four T-1s interconnecting the same locations for a different 
purpose, not associated with the T3 traffic.

Can anyone recommend Cisco or other vendor device to peel off four DS1s 
from the T3 at each end and pass the remainder as a single pipe for IP? 
  I've Googled and come up with mixed results.

We could if necessary swap the PA-T3+ cards for HSSI.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV