[c-nsp] FWSM CSCsi87893 purely cosmetic?

[Peter Rathlev]

Hello,

We just recently "discovered" the effects of CSCsi87893, where
configuring a "tftp-server" in the sys context gives funny output like
this:

FWSM/act(config)# tftp-server management 10.0.0.1 fwsm-sys
FWSM/act(config)# sh run
: Saved
:
FWSM Version 3.1(4) <system>
!
...<cut>...
  allocate-interface Vlan2131 
  config-url disk:/xyz.cfg
!

vPif_isVpifNumValid: Thread ssh vcid=1 from vpif=0x10001 is != current
vcid=0!
tftp-server  10.0.0.1 fwsm-sys
prompt hostname context state 
Cryptochecksum:snarfsnarfsnarf
: end
FWSM/act(config)#

It was easy finding CSCsi87893, but the bug toolkit isn't very specific.
It says "strange output may be noticed", but the above line gets written
to startup-config with "write mem". The functionality is there -- I can
"write net" without parameters and the expected happens.

What I'm wondering is: What will happen at the next reboot? Can it parse
this ouput correctly? Or will I just lose the tftp-server functionality?
Or will the FWSM fail to start?

We're about to upgrade (3.1(6+) has this fixed), but would like to be
certain about what happens after the reboot...

Regards,
Peter