[c-nsp] 6509-E blade question

[Tim Stevenson]

It will NOT work with sup32 in any OS. Even with CFC, there is no 
data path to the legacy bus in 67xx cards, only a control path (ie, 
headers for central lookups). And of course, there is no xbar on sup32.

Tim

At 09:35 AM 8/29/2008, Leslie Meade observed:
>I have a sup32 engine and a ws-x6724-spf blade. I know that it is 
>not supported in native IOS, but have been told that it will work under CATOS.
>Can anyone shed some light on this for me and point me in a direction to look.
>
>I thought it will only work under Sup720's.
>
>
>
>Leslie
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Data Center BU
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.