[c-nsp] PA-MC-T3 and T1 config questions

[Robert Boyle]

At 09:56 AM 1/24/2008, you wrote:
>Thanks very much for the example Robert!
>
>Do you know if m23 framing on the T3 is a standard with channelized DS3's? I
>use a number of ATM DS3's and we use c-bit framing there.

You're welcome. Today, C-bit is typically used when you have a point 
to point circuit. M23 is typically used when you have a channelized 
DS3. Check with your carrier to make sure you are using the same 
setting. Basically, with M23, you can use the extra signaling slots 
which would have been used by CBit to recover from clock slips to 
carry signaling info. Here is a white paper with more than you ever 
wanted to know.

http://www.sbei.com/files/ds3_wpaper.pdf

-Robert



Tellurian Networks - Global Hosting Solutions Since 1995
http://www.tellurian.com | 888-TELLURIAN | 973-300-9211
"Well done is better than well said." - Benjamin Franklin