[c-nsp] Line Code Violations on DS3

[Jay Hennigan]

Also, as someone else pointed out, it is very unusual to configure 
"clock source internal" when connected to a carrier's network.  In 
almost all cases you will want to have "clock source line" and pull 
clock from the carrier mux which is usually connected to a BITS clock or 
similar.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV