[c-nsp] HWIC-4ESW

[Dan Letkeman]

It was a while ago, but If I remember correctly, it did not work on
the hwic, only on the integrated ports.

You could pickup a cheap 827 or 837 router on ebay to do the pppoe.

Dan.

On Wed, Nov 19, 2008 at 11:36 AM, Peter Chuba <ptchuba at live.com> wrote:
> Hi,
>
> I've got a 2801 whose built-in ports are damaged. I was wondering if I could
> add an HWIC-4ESW module and use this to connect to both the provider and
> LAN. And will I be able to do NAT with this setup? Will I also be able to do
> PPPOE on the vlan interface? I think it should work but want to be sure
> before buying the card.
>
> Thanks
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>