[c-nsp] EoMPLS terminating on PE?

[Alex Wågberg]

On Wed, 22 Oct 2008 22:19:40 +0200
  Nathan <have.an.email at gmail.com> wrote:
> On Mon, Oct 20, 2008 at 12:54 PM, Oliver Boehmer 
>(oboehmer)
> <oboehmer at cisco.com> wrote:
>> Nathan <> wrote on Monday, October 20, 2008 10:29 AM:
>>> In effect, I want to extend the VC coming in on one PE 
>>>so that it
>>> (L3) terminates on another PE.
>>
>> you need the "routed pseudowire" feature, but this is 
>>currently only
>> supported on the 7600
> 
> I decided to xconnect the physical edge router's ATm 
>interface to a
> third router that has L2 connectivity to the router I 
>want the L3 to
> terminate on. Should work, right ?
> 
> My problem is now that the ATM subinterface does not 
>recognize the
> xconnect command at all :-( (On Fa and Gi subinterfaces 
>no problem).
> I've tried with and without atm route-bridged ip, on the 
>off-chance
> that the command might reappear, but no such luck.
> 
> Is this a limitation of the interface type or a lack 
>that is corrected
> in some more recent IOS? What would the Cisco "feature" 
>be? This is a
> 7206 G1 running c7200-js-mz.123-21.bin.
> 
> Thanks,
> -- 
> Nathan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

Maybe this will help?

http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsaal22.html

-- 
Alex Wågberg