[c-nsp] RES: Cisco 12406 Etherchannel

[Mark Tech]

Hi, thanks for that. Just had a look at my inventory

sh inventory
NAME: "slot 0", DESCR: "ISE 10G Modular Services Card v2"
PID: 12000-SIP-601     , VID: V04, SN: SAD12340460

Looks like I have an ISE card installed. If I look at the restrictions for the ISE, seems like only the following cards are supported:

IP Service Engine (ISE): 
–4-port Gigabit Ethernet ISE line card 
–4-port OC-3c/STM-1c POS/SDH ISE line card 
–8-port OC-3c/STM-1c POS/SDH ISE line card 
–16-port OC-3c/STM-1c POS/SDH ISE line card 
–4-port OC-12c/STM-4c POS/SDH ISE line card 
–1-port OC-48c/STM-16c POS/SDH ISE line card 

However it then goes to mention that the following cards support it.

Engine 5 SPA Interface Processors (SIPs): 
–10G Engine 5 SPA Interface Processor (12000-SIP-600) 
–2.5G multiservice engine SPA Interface Processor (12000-SIP-401) 
–5G multiservice engine SPA Interface Processor (12000-SIP-501) 
–10G multiservice engine SPA Interface Processor (12000-SIP-601) 

The GE cards are installed in a 12000-SIP-601, or is that I don't have an'Engine 5' within the 601installed?

Regards

Mark



----- Original Message ----
From: Leonardo Gama Souza <leonardo.souza at nec.com.br>
To: Mark Tech <techconfig at yahoo.com>
Cc: cisco-nsp at puck.nether.net
Sent: Tuesday, September 16, 2008 3:49:54 PM
Subject: RES: [c-nsp] Cisco 12406 Etherchannel


There are some restrictions...
Take a look: http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/lnkbndl.html
 
Cheers.

________________________________
De: cisco-nsp-bounces at puck.nether.net em nome de Mark Tech
Enviada: ter 16/9/2008 08:12
Para: cisco-nsp at puck.nether.net
Assunto: [c-nsp] Cisco 12406 Etherchannel


Hi
I am trying to configure Ethernchannel/link bundling on a 12406. The port channel seems to be accepted, however when I try and add a channel-group to my GE interfaces, it says its not supported? I am using SPA-10X1GE-V2 line cards with c12kprp-p-mz.120-32.SY6.bin IOS


interface Port-channel1
 ip address x.x.x.x 255.255.255.252
 no ip directed-broadcast
 channel-group minimum active 1
 no channel-group bandwidth control-propagation

router(config-if)#channel-group 1
Error: not supported on GigabitEthernet0/0/0.

Is there a way to bundle more that 1GE port on a 12406?

Regards

 Mark



     
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/