[c-nsp] VTY Lines

[Lee]

On 4/16/09, Eric Van Tol <eric at atlantech.net> wrote:
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
>> bounces at puck.nether.net] On Behalf Of Dracul
>> Sent: Thursday, April 16, 2009 12:19 AM
>> To: cisco-nsp at puck.nether.net
>> Subject: Re: [c-nsp] VTY Lines
>>
>> If you are running a critical network without the convenience of
>> rebooting,
>> Jim's Router# cle ip tcp tcb 58F2E668 worked for me
>>
>> but take note some IOS use the Router#clear tcp tcb  (without the 'ip')
>>
>> regards,
>> chris
>
> If you can't gain access to the CLI, it is possible to reset vty TCP
> sessions using SNMP, assuming you have a read-write string configured on the
> device.  I personally don't know the procedure, but there are tools out
> there such as the Solarwinds Engineers Edition toolset that let you do this.
>  If anyone knows the right procedure, maybe they can post it here.

How to Detect and Clear Hung TCP Connections using SNMP

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_problem_troubleshooting09186a00802b93ef.shtml