[c-nsp] Cisco 3560G and none-Cisco SFP

[Peter Rathlev]

On Mon, 2009-01-12 at 12:34 +0100, Rens wrote:
> 5d23h: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi0/2, putting
> Gi0/2 in err-disable state 
> 
> Gi0/2                        err-disabled 200          auto   auto unknown
> 
> The version I run is:
> 
> System image file is
> "flash:c3560-ipbase-mz.122-25.SEE3/c3560-ipbase-mz.122-25.SEE3.bin"
> 
> Anyone else have experienced a problem like this? Any easy fixes?

You could use the unsupported command "service unsupported-transceiver".

Beware that there's a reason the command is hiddden and unsupported --
with an unsupported SFP in the chassis Cisco can/may/will deny you
support for the device.

Regards,
Peter