[c-nsp] urgent help for cisco800

[Geoffrey Pendery]

I had issues with the 1200 APs requiring a different Flow Control
setting than the rest of the IOS boxes, and the behavior manifest as
"I can see the output, but it won't take my input - particularly
carriage returns"

Try Hardware, then XonXoff, for flow control.  Can't hurt.


-Geoff


On Mon, Jan 12, 2009 at 12:22 PM, adrian kok <adriankok2000 at yahoo.com.hk> wrote:
> Hi
>
> I use the usb to serial cable + console cable to
> connect the cisco800.
>
> the setting is
> speed: 9600
> parity bit: no
> control: None
> data bit: 8
>
> I can see the boot info in the hyperterminal but the
> keyboard is not responing.
> I reboot many times and the keyboard is still not
> working.
>
> Any idea and suggeston?
>
> ls the hyperminal issue? or any setting problem
>
> Thank you
>
> Send instant messages to your online friends http://uk.messenger.yahoo.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>