[c-nsp] rate limits on 2970?

[Randy McAnally]

2950 can rate limit in 1Mbps increments if you have the EI software using
policers.  Not sure about 2970.

--
Randy

---------- Original Message -----------
From: Alexey Polyakov <berghauz at gmail.com>
To: Mike <mike-cisconsplist at tiedyenetworks.com>
Cc: cisco-nsp at puck.nether.net
Sent: Wed, 4 Nov 2009 20:19:14 +0300
Subject: Re: [c-nsp] rate limits on 2970?

> Hello.
> As far as I know, there is no ratelimitg on 2950/60/70.
> You can use the mechanisms of QoS, but the ratelimiting not work as 
> well, as it described by cisco(token bucket mechanism and etc.).
> 
> Although you can use <srr-queue bandwidth> in config-if mode, but it 
> affect only ingress traffic.
> 
> 2009/11/4 Mike <mike-cisconsplist at tiedyenetworks.com>
> 
> > Hi,
> >
> >   I have a pair of 2970's and I want to know if/how it's possible to
> > establish input and output rate limits on it? If there's a cisco guide
> > sorry for bothering you all but a very quick google doesn't give me any
> > answer. The switches are running  12.2(25)SEC code if it makes a
> > difference.
> >
> > Thank you.
> >
> >
> >
> WBR Aleksey Polyakoff ICQ:9001016
> Mike Ditka 
> <http://www.brainyquote.com/quotes/authors/m/mike_ditka.html>  - "If 
> God had wanted man to play soccer, he wouldn't have given us arms."
_______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
------- End of Original Message -------