[c-nsp] Interface descriptions - what do you put in?

[luismi]

Area code - critical value - description - remote port [port-cX]

Area code: [ip|sys|rf] are responsible of the end device
critical value: 
 00 total service disruption for the customers 
 01 partial service disruption for the customers - some customers are
working others not or the service is degraded
 02 no impact in the customers (ex, pcs or internal desktops)

description: as you prefer
remote port: Gi0/1/12 or G1/12 RFEC1 (RFEC = remote port-channel)

example:

A - 00 - Trunk to stack01 - G1/0/24 RFEC1

it works ok for us



El jue, 21-05-2009 a las 10:07 -0500, Pete Templin escribió:
> List,
> 
> What do you put into your interface descriptions?  Do you document 
> circuit ID, far-end equipment/port, near-end equipment/port, and/or 
> anything else?
> 
> Pete
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/