[c-nsp] RES: FABRIC-3-ERR_HANDLE

[Leonardo Gama Souza]

Hi,

What is the output from 'show controllers errors fabric'?
First of all I would try to reseat the LC6 and see if the CRC errors
stop. 

-----Mensagem original-----
De: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] Em nome de Antonio Soares
Enviada em: segunda-feira, 16 de novembro de 2009 10:15
Para: cisco-nsp at puck.nether.net
Assunto: [c-nsp] FABRIC-3-ERR_HANDLE

Hello group,

I have a 12k reporting this:

%FABRIC-3-ERR_HANDLE: Reconfigure LC on fabric due to CRC error from
slot 6

In one week, i have 4 of these messages.

Slot 6 is a SIP-601 containing 2 x SPA-10G.

What could be the problem ?

The "show controllers fia" do not show any problem.

The "execute-on slot 6 show controllers fia" show this:

Switch cards present: 0x1F
Switch cards monitored: 0x1F
          0          1          2          3          4
       --------   --------   --------   --------   --------
los    0          0          0          0          0          
state  Off        Off        Off        Off        Off       
crc16  53989      0          0          0          0          
xor error0          0          0          0          
cell drops1020       1020       1020       1020       


IOS=c12kprp-p-mz.120-32.SY6.bin


Thanks.

Regards,
 
Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/