[c-nsp] portchannel load balancing between L3 switch and router

[Arie Vayner (avayner)]

Elmar,

Please check this link:
http://www.cisco.com/en/US/docs/ios/ios_xe/lanswitch/configuration/guide
/lsw_cfg_flwload_xe_ps9587_TSD_Products_Configuration_Guide_Chapter.html

You should be looking at the "Flow Based" option...

Per the command reference
(http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_l1.h
tml#wp1022040) This is available since IOS XE 2.5

Arie


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Elmar K. Bins
Sent: Tuesday, April 06, 2010 17:13
To: Pavel Dimow
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] portchannel load balancing between L3 switch and
router

Re Pavel,

paveldimow at gmail.com (Pavel Dimow) wrote:

> port-channel load-balancing vlan-manual
> 
> and I understand that I can't have one vlan loadbalanced across two
> portchannel members but
> only the one at the time and second member is standby.
> 
> Am I right or there is another solution?

I have tried the same thing (trunk-channeling), and it just does not
work on ASRs (yet?).

So yes, you are right, there seems to be no other solution right now.
Maybe someone from Cisco can tell us whether this issue will be
remedied.

Yours,
	Elmar.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/