[c-nsp] 876 & Siemens DSLAM @ aDSL2+ ?

[David Rothera]

We do have circuits that use Annex-M that are using the same FW but not sure if it also supports Annex-B...

Unfortunately no SP offers Annex-B in the UK, it is either A or M.


On 13 Dec 2010, at 13:12, Garry wrote:

> On 13.12.2010 13:59, David Rothera wrote:
>> Could you run a 'sh dsl int at0' and paste the input. I have pretty much every single DSL firmware for the 877 including ones that drastically improve ADSL2 performance but I'm not too sure if the 876 takes the same firmware...
> 
> The 877 (which is for Annex-A) most likely uses a different DSL firmware
> than 876 (Annex-B) ...
> 
> Init FW:         init_AMR-3.0.014_no_bist.bin
> Operation FW:    AMR-3.0.014.bin
> FW Source:       embedded
> FW Version:      3.0.14
> 
> Tnx, Garry