[c-nsp] ASR etherchannel

Roddy Strachan roddy.strachan at staff.netspace.net.au
Sun Feb 7 18:05:39 EST 2010


Hey all,

Currently we run two ASR 1004¹s in an LNS environment, we are about to reach
the maximum of 1GB on the port into our core network, so I¹m thinking of
ways to give us more bandwidth.  One way that came to mind was using
etherchannel/port-channel.

I¹ve set this up using a 7301 to our core quite well and it seems to work.

Has anyone had any experience with the ASR side of things?

Any known issues/bugs that exist?

We are currently running IOS Version 12.2(33)XNB3

It seems the config options are there.

Basically I just want to add another gig port to the group, so we get 2GB
into the core from the LNS.



Thanks


This email and any files transmitted with it are confidential and intended
 solely for the use of the individual or entity to whom they are addressed. 
Please notify the sender immediately by email if you have received this 
email by mistake and delete this email from your system. Please note that
 any views or opinions presented in this email are solely those of the
 author and do not necessarily represent those of the organisation. 
Finally, the recipient should check this email and any attachments for 
the presence of viruses. The organisation accepts no liability for any 
damage caused by any virus transmitted by this email.



More information about the cisco-nsp mailing list