[c-nsp] QoS on Cisco 2600

Paul Stewart paul at paulstewart.org
Thu Jul 1 11:38:16 EDT 2010


2621XM's and I believe 2621's do NBAR no problem... we have it running on
XM's in several locations today...

Paul


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jeff Wojciechowski
Sent: July-01-10 11:22 AM
To: Stephane MAGAND; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] QoS on Cisco 2600

Hi Stephanie,

Here's what we have configured:

class-map match-all citrix-all
 match protocol citrix


policy-map PPS
 class citrix-all
  set ip dscp cs3
    bandwidth 800
 class class-default
    fair-queue
  set ip dscp af21


ip nbar protocol-discovery on all interfaces

service policy output PPS on my WAN interface

(in this case we are giving Citrix 800kbps and using Fair Queuing on
remainder of traffic) Not sure if this will work on a 2600.....this is
running on a 3825. I think the issue will be whether or not your 2600 will
do NBAR.

Then do:

Show policy map interface *wan interface* to verify packets are going thru
queue - in my case:

    Class-map: citrix-all (match-all)
      55310079 packets, 4798639048 bytes
      5 minute offered rate 340000 bps, drop rate 0 bps
      Match: protocol citrix
      Queueing
      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/52/0
      (pkts output/bytes output) 55310028/4798625680
      QoS Set
        dscp cs3
          Packets marked 55310080
      bandwidth 800 kbps

Thanks,

-Jeff


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Stephane MAGAND
Sent: Thursday, July 01, 2010 1:34 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] QoS on Cisco 2600

Hi

I have a Cisco 2600, connected at 4 Mbits by a Ethernet Link at a Cisco
7204.

I want add qos for :
   Telnet (TCP 23) and Cistrix

Exemple: 1 Mbits reserved to this protocol

If citrix/telnet don't use this bandwitch, bw available for other protocole.

Anyone have a sample config ?

Thanks
STephane
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

This electronic mail (including any attachments) may contain information
that is privileged, confidential, or otherwise protected from disclosure to
anyone other than its intended recipient(s). Any dissemination or use of
this electronic mail or its contents (including any attachments) by persons
other than the intended recipient(s) is strictly prohibited. If you have
received this message in error, please delete the original message in its
entirety (including any attachments) and notify us immediately by reply
email so that we may correct our internal records.  Midland Paper Company
accepts no responsibility for any loss or damage from use of this electronic
mail, including any damage resulting from a computer virus.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/




More information about the cisco-nsp mailing list