[c-nsp] High SNMP ENGINE CPU usage on VXR 7206

[Oliver Eyre]

Further to this, a good start would be to put an ACL on your snmp-server to
only permit hosts that require access.

You may also want to block/slow SNMP on certain interfaces that don't have
any reason to be sending it.

Oliver 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Peter Hicks
Sent: Monday, 26 July 2010 1:49 AM
To: bharath kondi
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] High SNMP ENGINE CPU usage on VXR 7206

On Sun, 2010-07-25 at 23:13 +0800, bharath kondi wrote:

> Please help me on the below issue I am facing right now with my Cisco VXR
> 7206 router. There is a high CPU utilization on SNMP ENGINE, please help
me
> if you are already faced the issue. I give all the information below from
> our router

Is it affecting the performance of the router at all?

What SNMP traffic is there to and from the router?


Peter


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/