[c-nsp] WS-X6148A-GE-45AF is not powering up

Andriy Bilous andriy.bilous at gmail.com
Tue Jun 1 12:07:22 EDT 2010


#show diagnostics result module 1 detail

should help you identify which GOLD test has failed.

#hw-module module 1 reset

resets power to the module

On Tue, Jun 1, 2010 at 3:56 PM, Renelson Panosky <panocisco77 at gmail.com>wrote:

> Thank you, same thing Cisco suggest
>
> On Tue, Jun 1, 2010 at 9:45 AM, Dmitry Valdov <dv at dv.ru> wrote:
>
> >
> >
> > On Tue, 1 Jun 2010, Anton Turygin wrote:
> >
> > On Tue, 1 Jun 2010, Dmitry Valdov wrote:
> >>
> >> Hello,
> >>>
> >>> This is the answer:
> >>> ==
> >>> 1    WS-X6148A-GE-45AF   112.56  2.68     -     -     on    off
> >>> (Diagnostic
> >>> Failure)
> >>> ==
> >>>
> >>> Try to reinsert the card. If it doesn't help, replace it.
> >>>
> >>
> >> He had problems with module 6. And now it is module 1. Seems strange for
> >> me.
> >>
> >
> > It might be that he had swapped it  :-)
> >
> > Console (or "terminal monitor") output after reinserting the card could
> > help.
> >
> >
> >
> >
> >> Renelson, as I can see you have a WS-C6509-E chassis. Move the card from
> >> slot 6 to slot 7 and show the output of "show module".
> >>
> >>
> >>>
> >>> On Tue, 1 Jun 2010, Renelson Panosky wrote:
> >>>
> >>> COSW02-2165-FRED#sho ver
> >>>> Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version
> >>>> 12.2(33)SXH6, RELEASE SOFTWARE (fc1)
> >>>> Technical Support: http://www.cisco.com/techsupport
> >>>> Copyright (c) 1986-2009 by Cisco Systems, Inc.
> >>>> Compiled Thu 15-Oct-09 11:50 by prod_rel_team
> >>>>
> >>>> ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
> >>>>
> >>>> COSW02-2165-FRED uptime is 1 day, 4 hours, 41 minutes
> >>>> Uptime for this control processor is 1 day, 4 hours, 42 minutes
> >>>> Time since COSW02-2165-FRED switched to active is 1 day, 4 hours, 41
> >>>> minutes
> >>>> System returned to ROM by  power cycle at 04:28:08 EDT Mon May 31 2010
> >>>> (SP
> >>>> by power on)
> >>>> System restarted at 04:30:36 EDT Mon May 31 2010
> >>>> System image file is "sup-bootdisk:s3223-ipbasek9-mz.122-33.SXH6.bin"
> >>>>
> >>>>
> >>>> This product contains cryptographic features and is subject to United
> >>>> States and local country laws governing import, export, transfer and
> >>>> use. Delivery of Cisco cryptographic products does not imply
> >>>> third-party authority to import, export, distribute or use encryption.
> >>>> Importers, exporters, distributors and users are responsible for
> >>>> compliance with U.S. and local country laws. By using this product you
> >>>> agree to comply with applicable laws and regulations. If you are
> unable
> >>>> to comply with U.S. and local laws, return this product immediately.
> >>>>
> >>>> A summary of U.S. laws governing Cisco cryptographic products may be
> >>>> found
> >>>> at:
> >>>> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> >>>>
> >>>> COSW02-2165-FRED#sho power
> >>>> system power redundancy mode = redundant
> >>>> system power total =     3795.12 Watts (90.36 Amps @ 42V)
> >>>> system power used =       934.08 Watts (22.24 Amps @ 42V)
> >>>> system power available = 2861.04 Watts (68.12 Amps @ 42V)
> >>>>                       Power-Capacity PS-Fan Output Oper
> >>>> PS   Type               Watts   A @42V Status Status State
> >>>> ---- ------------------ ------- ------ ------ ------ -----
> >>>> 1    WS-CAC-4000W-US    3795.12 90.36  OK     OK     on
> >>>> 2    WS-CAC-4000W-US    3795.12 90.36  OK     OK     on
> >>>>                       Pwr-Allocated  Oper
> >>>> Fan  Type               Watts   A @42V State
> >>>> ---- ------------------ ------- ------ -----
> >>>> 1    WS-C6509-E-FAN      150.36  3.58  OK
> >>>>                       Pwr-Requested  Pwr-Allocated  Admin Oper
> >>>> Slot Card-Type          Watts   A @42V Watts   A @42V State State
> >>>> ---- ------------------ ------- ------ ------- ------ ----- -----
> >>>> 1    WS-X6148A-GE-45AF   112.56  2.68     -     -     on    off
> >>>> (Diagnostic
> >>>> Failure)
> >>>> 2    WS-X6148A-GE-45AF   112.56  2.68   112.56  2.68  on    on
> >>>> 3    WS-X6148A-GE-45AF   112.56  2.68   112.56  2.68  on    on
> >>>> 4    WS-X6148A-GE-45AF   112.56  2.68   112.56  2.68  on    on
> >>>> 5    WS-SUP32-GE-3B      154.98  3.69   154.98  3.69  on    on
> >>>> 6    WS-X6148A-GE-45AF   154.98  3.69   154.98  3.69  on    on
> >>>>                       Inline         Inline         Inline
> >>>> Inline
> >>>>                       Pwr-Requested  Pwr-Allocated  Local-Pwr-Pool
> Power
> >>>> Slot Card-Type          Watts   A @42V Watts   A @42V Watts   A @42V
> >>>> Status
> >>>> ---- ------------------ ------- ------ ------- ------ ------- ------
> >>>> ----------
> >>>> 1    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> >>>> Unknown
> >>>> 2    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> >>>> On
> >>>> 3    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> >>>> On
> >>>> 4    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> >>>> On
> >>>> 6    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> >>>> On
> >>>> COSW02-2165-FRED#
> >>>>
> >>>>
> >>>> Sho ver
> >>>> If you require further assistance please contact us by sending email
> to
> >>>> export at cisco.com.
> >>>>
> >>>> cisco WS-C6509-E (R7000) processor (revision 1.2) with 227328K/34816K
> >>>> bytes
> >>>> of memory.
> >>>> Processor board ID SMG1049N671
> >>>> R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3
> >>>> Cache
> >>>> Last reset from power-on
> >>>> 2 Virtual Ethernet interfaces
> >>>> 249 Gigabit Ethernet interfaces
> >>>> 1915K bytes of non-volatile configuration memory.
> >>>>
> >>>> 65536K bytes of Flash internal SIMM (Sector size 512K).
> >>>> Configuration register is 0x2102
> >>>>
> >>>> COSW02-2165-FRED#
> >>>>
> >>>> On Tue, Jun 1, 2010 at 8:53 AM, Anton Turygin <pa3op at tsua.net> wrote:
> >>>>
> >>>> Hello,
> >>>>>
> >>>>> Please show the output of "show ver" command.
> >>>>>
> >>>>>
> >>>>> On Tue, 1 Jun 2010, Renelson Panosky wrote:
> >>>>>
> >>>>>  Hello All
> >>>>>
> >>>>>>
> >>>>>> One of my blade is not powering up but i can't remember the command
> to
> >>>>>> power
> >>>>>> it back up.  Can some one please help me ? The sho mod command is
> >>>>>> below.
> >>>>>>
> >>>>>> #sho mod
> >>>>>> Mod Ports Card Type                              Model Serial
> >>>>>> No.
> >>>>>> --- ----- -------------------------------------- ------------------
> >>>>>> -----------
> >>>>>>  1   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
> >>>>>> SAL1017L82X
> >>>>>>  2   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
> >>>>>> SAD093905SP
> >>>>>>  3   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
> >>>>>> SAD093900TK
> >>>>>>  4   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
> >>>>>> SAL1011FSAE
> >>>>>>  5    9  Supervisor Engine 32 8GE (Active)      WS-SUP32-GE-3B
> >>>>>> SAD0939052K
> >>>>>>  6   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
> >>>>>> SAL1008ECF3
> >>>>>>
> >>>>>> Mod MAC addresses                       Hw    Fw           Sw
> >>>>>> Status
> >>>>>> --- ---------------------------------- ------ ------------
> >>>>>> ------------
> >>>>>> -------
> >>>>>>  1  0017.94da.a540 to 0017.94da.a56f   2.4   8.4(1)
> 8.7(0.22)BUB
> >>>>>> Ok
> >>>>>>  2  0015.c649.4c00 to 0015.c649.4c2f   1.2   8.4(1)
> 8.7(0.22)BUB
> >>>>>> Ok
> >>>>>>  3  0015.c649.d300 to 0015.c649.d32f   1.2   8.4(1)
> 8.7(0.22)BUB
> >>>>>> Ok
> >>>>>>  4  0017.0eb2.5680 to 0017.0eb2.56af   2.0   8.4(1)
> 8.7(0.22)BUB
> >>>>>> Ok
> >>>>>>  5  0013.809d.e556 to 0013.809d.e561   4.2   12.2(18r)SX2
> 12.2(33)SXH6
> >>>>>> Ok
> >>>>>>  6  0017.0eb1.8a80 to 0017.0eb1.8aaf   2.0   8.4(1)
> 8.7(0.22)BUB
> >>>>>> PwrDown
> >>>>>>
> >>>>>> Mod  Sub-Module                  Model              Serial       Hw
> >>>>>> Status
> >>>>>> ---- --------------------------- ------------------ -----------
> >>>>>> -------
> >>>>>> -------
> >>>>>>  1  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1005C1WY  2.2
> Ok
> >>>>>>  2  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD093903ZR  1.2
> Ok
> >>>>>>  3  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD0938067D  1.2
> Ok
> >>>>>>  4  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1010FGJL  2.0
> Ok
> >>>>>>  5  Policy Feature Card 3       WS-F6K-PFC3B       SAD0938037W  2.1
> Ok
> >>>>>>  5  Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A      SAD093804E3  3.0
> Ok
> >>>>>>  6  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1008EB9X  2.0
> >>>>>> PwrDown
> >>>>>>
> >>>>>> Mod  Online Diag Status
> >>>>>> ---- -------------------
> >>>>>>  1  Pass
> >>>>>>  2  Pass
> >>>>>>  3  Pass
> >>>>>>  4  Pass
> >>>>>>  5  Pass
> >>>>>>  6  Not Applicable
> >>>>>> _______________________________________________
> >>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>>>>>
> >>>>>>
> >>>>>> --
> >>>>> RAZ-UANIC
> >>>>> RAZ-RIPE
> >>>>> Technological Systems CJSC
> >>>>> Senior Network Engineer
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>>>
> >>>>
> >>>
> >>>
> >> --
> >> RAZ-UANIC
> >> RAZ-RIPE
> >> Technological Systems CJSC
> >> Senior Network Engineer
> >>
> >>
> >>
> >  --
> > Dmitry Valdov
> > CCIE #15379 (R&S and SP)
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list