[c-nsp] %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected, resetting
Antonio Soares
amsoares at netcabo.pt
Fri Nov 5 13:46:59 EDT 2010
Hello group,
Another problem I have my hands:
++++++++++++++++++++++++++++++++++++++++++++++
00:02:43: %PFREDUN-SP-STDBY-6-STANDBY: Active not responding, will be taken
down in 15 sec
00:02:43: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.
00:02:58: %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected,
resetting
00:02:43: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.
00:02:58: %PFREDUN-SP-STDBY-6-STANDBY: Failure of ACTIVE processor detected,
resetting
00:02:58: %SYS-SP-STDBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.
%Software-forced reload
00:04:31: SP-STDBY: Failed to send heartbeat poison message
Breakpoint exception, CPU signal 23, PC = 0x402DF304
++++++++++++++++++++++++++++++++++++++++++++++
The Standby crashed because it lost contact with the active ??? In fact the
active crashed, but I was expecting to have the Standby to take the
ownership of the box, not crashing as well. Do we call this redundancy ? :)
I don't find anything with bug toolkit.
6500 running 12.2.18SXF15a.
Is this a new bug ?
Thanks.
Regards,
Antonio Soares, CCIE #18473 (R&S/SP)
amsoares at netcabo.pt
More information about the cisco-nsp
mailing list