[c-nsp] STM-1 loop prevention

[RAZAFINDRATSIFA Rivo Tahina]

Hi all,

I'm using a 7200-G2 with the the following:

Software: IOS Version c7200p-adventerprisek9-mz.124-15.T6.bin

3 Packet over SONET interfaces
NAME: "module 1", DESCR: "POS Port Adapter (SM)"
PID: PA-POS-OC3SMI=    , VID: N/A, SN: 25403598
(Interface POS1/0
Hardware is Packet over Sonet)


I'm running BGP with this box.
During test performed by the provider, they did physical loopback on 
interfaces, that causes the box to crash, is there an option the 
interface down when loop is detected?

Regards.