[c-nsp] SXI4a

[Chris Evans]

Open a tac case please?
On Oct 14, 2010 3:29 PM, "Grzegorz Janoszka" <Grzegorz at janoszka.pl> wrote:
> On 14-10-10 09:40, Alexander Clouter wrote:
>> SXI4a is working fine on one of our 6500's and I updated from SXI3 to
>> SXI4a on the other two on Tuesday. No problems so far, although:
>
> Just discovered an interesting bug on SXI4. Take an interface, run
> standby version 2 there, create an IPv6 HSRP address, ie:
> standby XXX ipv6 2001:db8:1:2::1/64
> then, (not earlier) create an IP from this subnet on the interface:
> int GiX/Y
> ipv6 address 2001:db8:1:2::2/64
> after that run:
> show ipv6 route 2001:db8:1:2::3
> interesting, huh?
>
> --
> Grzegorz Janoszka
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/