[c-nsp] Redistributing ipv6 static default route into eigrp failure
Matthew Huff
mhuff at ox.com
Wed Oct 20 09:31:14 EDT 2010
No one replied, but I found the problem and/or bug. Unlike eigrp over ipv4, setting "redistribute static" with no metrics defined doesn't work. It silently accepts it, but does not do any redistribution of static routes. Changing it to "redistribute static metric 1 1 1 1 1" works.
----
Matthew Huff | One Manhattanville Rd
OTA Management LLC | Purchase, NY 10577
http://www.ox.com | Phone: 914-460-4039
aim: matthewbhuff | Fax: 914-460-4139
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Matthew Huff
> Sent: Tuesday, October 19, 2010 5:14 PM
> To: 'cisco-nsp at puck.nether.net'
> Subject: [c-nsp] Redistributing ipv6 static default route into eigrp failure
>
> Okay, I must be missing something. I've setup a default static route that is showing up in the ipv6
> route tables, but not in the local ipv6 eigrp topology nor redistributing out. Anyone have a clue? Or
> yet another ipv6 bug
>
> interface Vlan4
> ip address 129.77.4.252 255.255.255.0
> ipv6 address 2620:0:2810:104::252/64
> ipv6 enable
> ipv6 eigrp 14607
> standby version 2
> standby 4 ip 129.77.4.254
> standby 4 priority 108
> standby 4 preempt
> standby 104 ipv6 2620:0:2810:104::254/64
> standby 104 priority 108
> standby 104 preempt
> end
>
> ipv6 route ::/0 Vlan4 2620:0:2810:104::1
>
> ipv6 router eigrp 14607
> eigrp router-id 129.77.40.8
> redistribute static
>
>
> switch-user2#show ipv6 route
> IPv6 Routing Table - Default - 19 entries
> Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
> B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2
> IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP external
> O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
> ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
> S ::/0 [1/0]
> via 2620:0:2810:104::1, Vlan4
> C 2620:0:2810:104::/64 [0/0]
> via Vlan4, directly connected
> L 2620:0:2810:104::252/128 [0/0]
> via Vlan4, receive
> D 2620:0:2810:11E::/64 [90/768]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> D 2620:0:2810:E001::252/127 [90/1024]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> D 2620:0:2810:E001::254/127 [90/768]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> C 2620:0:2810:E002::252/127 [0/0]
> via TenGigabitEthernet1/1, directly connected
> L 2620:0:2810:E002::253/128 [0/0]
> via TenGigabitEthernet1/1, receive
> D 2620:0:2810:E002::254/127 [90/768]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> D 2620:0:2810:E101::252/127 [90/1024]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> D 2620:0:2810:E101::254/127 [90/768]
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> C 2620:0:2810:E102::252/127 [0/0]
> via TenGigabitEthernet1/2, directly connected
> L 2620:0:2810:E102::253/128 [0/0]
> via TenGigabitEthernet1/2, receive
> D 2620:0:2810:E102::254/127 [90/768]
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> D 2620:0:2810:FF01::1/128 [90/128512]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> D 2620:0:2810:FF01::2/128 [90/128512]
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> D 2620:0:2810:FF01::7/128 [90/128768]
> via FE80::2D0:FF:FEF3:7000, TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0, TenGigabitEthernet1/2
> LC 2620:0:2810:FF01::8/128 [0/0]
> via Loopback0, receive
> L FF00::/8 [0/0]
> via Null0, receive
>
> switch-user2#show ipv6 eigrp topology
> EIGRP-IPv6 Topology Table for AS(14607)/ID(129.77.40.8)
> Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
> r - reply Status, s - sia Status
>
> P 2620:0:2810:E101::254/127, 1 successors, FD is 768
> via FE80::2D0:4FF:FE16:0 (768/512), TenGigabitEthernet1/2
> P 2620:0:2810:104::/64, 1 successors, FD is 2816
> via Connected, Vlan4
> P 2620:0:2810:FF01::2/128, 1 successors, FD is 128512
> via FE80::2D0:4FF:FE16:0 (128512/128256), TenGigabitEthernet1/2
> P 2620:0:2810:E001::252/127, 2 successors, FD is 1024
> via FE80::2D0:FF:FEF3:7000 (1024/768), TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0 (1024/768), TenGigabitEthernet1/2
> via FE80::209:44FF:FE22:EEC0 (3072/512), Vlan4
> P 2620:0:2810:FF01::7/128, 2 successors, FD is 128768
> via FE80::2D0:FF:FEF3:7000 (128768/128512), TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0 (128768/128512), TenGigabitEthernet1/2
> via FE80::209:44FF:FE22:EEC0 (130816/128256), Vlan4
> P 2620:0:2810:FF01::1/128, 2 successors, FD is 128512
> via FE80::2D0:FF:FEF3:7000 (128512/128256), TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0 (128512/128256), TenGigabitEthernet1/2
> P 2620:0:2810:E002::254/127, 1 successors, FD is 768
> via FE80::2D0:FF:FEF3:7000 (768/512), TenGigabitEthernet1/1
> P 2620:0:2810:E102::254/127, 1 successors, FD is 768
> via FE80::2D0:4FF:FE16:0 (768/512), TenGigabitEthernet1/2
> P 2620:0:2810:E001::254/127, 1 successors, FD is 768
> via FE80::2D0:FF:FEF3:7000 (768/512), TenGigabitEthernet1/1
> P 2620:0:2810:E101::252/127, 2 successors, FD is 1024
> via FE80::2D0:FF:FEF3:7000 (1024/768), TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0 (1024/768), TenGigabitEthernet1/2
> via FE80::209:44FF:FE22:EEC0 (3072/512), Vlan4
> P 2620:0:2810:FF01::8/128, 1 successors, FD is 128256
> via Connected, Loopback0
> P 2620:0:2810:E002::252/127, 1 successors, FD is 512
> via Connected, TenGigabitEthernet1/1
> P 2620:0:2810:11E::/64, 2 successors, FD is 768
> via FE80::2D0:FF:FEF3:7000 (768/512), TenGigabitEthernet1/1
> via FE80::2D0:4FF:FE16:0 (768/512), TenGigabitEthernet1/2
> P 2620:0:2810:E102::252/127, 1 successors, FD is 512
> via Connected, TenGigabitEthernet1/2
>
>
> ----
> Matthew Huff | One Manhattanville Rd
> OTA Management LLC | Purchase, NY 10577
> http://www.ox.com | Phone: 914-460-4039
> aim: matthewbhuff | Fax: 914-460-4139
>
>
More information about the cisco-nsp
mailing list