[c-nsp] load balancing

[Rodney Dunn]

On 9/28/10 1:22 PM, jack daniels wrote:
> Hi,
>
>
>
>                    R1--------------------R2
>                      |                        |
> Y.Y.Y.0        |                        |------------------X.X.X.0
>                      |                        |
>                      |                        |
>                     R4--------------------R5
>
>
> If I want to load balance traffic from Y.Y.Y.0  to X.X.X.0 in such a
> way that R1 R2 path traffic sent is 60 Mb and R1R4R5 path traffic sent
> is 20 Mb.Is this possible with OSPF ?

No.


>
> If no which way can I achieve this apart from EIGRP ?
> _______________________________________________

You can't do it for a single subnet.

You *might* could do it with some PfR configuration by using a more 
specific set of forwarding (ie: pbr, /32's, etc...)

Rodney


> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/