[c-nsp] 12.2SX vlan-mapping

[Daniel Holme]

On 5 April 2011 09:51, Phil Mayers <p.mayers at imperial.ac.uk> wrote:
> On 04/05/2011 09:23 AM, Daniel Holme wrote:
>>
>> Hello folks
>>
>> Does anybody have any experience of poor performance (very low
>> throughput limitation) when using vlan-mapping in 12.2SX?
>>
>>  switchport vlan mapping enable
>>  switchport vlan mapping 70 770
>>  switchport vlan mapping 71 771
>
> We've used it with no problems on a fairly well-loaded 6704/10gig port,
> under 12.2(33)SXI. We had well over 30 vlans mapped.
>
> What does "poor performance" mean?

Approximately 200kbit/s throughput.

-- 
Daniel Holme