[c-nsp] QoS VLAN Marking is not working 7600

[omar parihuana]

Leonardo,

Thank you for your answer,  there is enable MPLS between CRS and 7600.
however, the PFC used is PFC3B. please do you have any doc regarding:
"Moreover only PFC3C/PFC3CXL supports ingress EXP marking at ip2mpls." ?
I'm reading
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/mplsqos.html#wp1531487
I didn't find details about the "EXP Marking at ingress".

Rgds.


On Wed, Aug 24, 2011 at 4:07 PM, Leonardo Gama Souza <
leonardo.souza at nec.com.br> wrote:

> Omar,
>
> You won't be able to mark EXP bits if your interface to CRS isn't MPLS
> enabled.
> Moreover only PFC3C/PFC3CXL supports ingress EXP marking at ip2mpls.
>
> Cheers.
>



-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!