[c-nsp] QinQ config sample on Cisco 7600/6500

[Stig Meireles Johansen]

Rolf wrote (in short):
> switchport mode dot1q-tunnel
>
> When trying to set the above commands I get that error:
> Gi4/48 doesn't support 802.1q tunneling.
> My linecard is a WS-X6548-GE-TX, does that mean I cannot use QinQ here or
> is there another way ?
> Same config on a WS-X6724-SFP is accepted.

>>nobody an idea about this ?
>>Cannot be i am the first one trying to run/built such setup or migrating
>>from a platform that can do it. ;)

See this link;

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/dot1qtnl.html

" The WS-X6548-GE-TX, WS-X6548V-GE-TX, WS-X6148-GE-TX, and WS-X6148V-GE-TX switching modules do not support IEEE 802.1Q tunneling."

/Stig