[c-nsp] How to see interface configuration after card failure on ASR9K

[Mark Tinka]

On Wednesday, December 28, 2011 08:48:43 PM Daniel Roesen 
wrote:

> So you can preconfigure interfaces, but not see and edit
> the remembered config of interfaces which got physically
> removed (or linecard shut down)?

In IOS XR, if you preconfigure interfaces and the line card 
on which they are is removed, the preconfigured statements 
will re-appear automatically. But that requires that 
interfaces were configured with the 'preconfigure' command 
to begin with.

Also, there are certain interfaces features that can only be 
verified after the MSC or FP is installed into the chassis. 

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20111228/d8cc6df4/attachment.sig>