[c-nsp] Bonded T3 Bandwidth issue

[Keegan Holley]

The anda is a metro E box.  Are you bonding them and then turning the whole
thing into ethernet? Also, how are they bonded?  Are you running ml-ppp
between the anda and the cisco?

On Thu, Feb 24, 2011 at 1:29 PM, Seth Mattinen <sethm at rollernet.us> wrote:

> On 2/24/2011 10:02, Lawrence wrote:
> > Here is the further information that you have requested.  I am using
> > iperf unix client/server to test my speed.  I have the same 45M limit
> > if I try a bit torrent.  I have a cisco 7200 router that is connected
> > via a mvp copper to fiber converter. The t3s are bonded with an anda
> > 2200.  I have unbonded both t3s and they both get 45M over each
> > circuit.
> >
>
>
> But *how* are you bonding them? Config specifics, not equipment.
>
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>