[c-nsp] CIsco 5548P with 2248TP

[Thomason, Simon]

Configuration would be a good starting point?

I am assuming you have checked all the basic things; Plugged in and powered on? Cabled correctly (Multi or single mode cables)? Interface show fex or optic?


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Renelson Panosky
Sent: Friday, 3 June 2011 4:52 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] CIsco 5548P with 2248TP

Have anybody here is running  Cisco Nexus 5548P with 2248TP.  I configured
everything but i still can't see the Cisco Nexus 2248TP.  Can anyone help me
with this ?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Like us on Facebook at http://www.facebook.com/racqofficial
Follow us on Twitter at http://twitter.com/RACQOfficial

Hot foot it to RACQ MotorFest at Eagle Farm Racecourse on 17 July and swoon over Queensland’s largest display of collectable vehicles. Visit www.racq.com/motorfest

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited.  RACQ does not warrant or represent that this email is free from viruses or defects.  If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.