[c-nsp] IPv6 Support in Cisco IOS AnyConnect?

[Kaj Niemi]

Hi,


IOS SSL VPN doesn¹t currently support IPv6 for SVC. See Features Not
Supported on the Cisco IOS SSL VPN
<http://www.cisco.com/en/US/docs/ios/sec_secure_connectivity/configuration/
guide/sec_ssl_vpn_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1
502587>

It works quite well on ASA with the exception of not being able to supply
IPv6 name servers so you can't pretend to have IPv6 only connectivity.
Also, at least with OS X, if you have IPv6 on the LAN and then enter SVC
and enable your tunnel, when you disconnect your IPv6 connectivity on the
LAN wont work anymore.



Kaj




On 16/6/2011 18:34, "Chris Mason" <chris at noodles.org.uk> wrote:

>Is anyone from Cisco able to confirm if IPv6 is supported when using
>the IOS based SSL VPN feature (inside the VPN)?
>The AnyConnect VPN client has a field for "Client Address (IPv6)" but
>I can't see how to enable it on the router.
>
>Using 15.0(1)M6 on the router and AnyConnect 2.5 on the client.
>
>I can see it is supported if I was using an ASA as the headend, but
>looking for some pointers when using an IOS based head-end?