[c-nsp] Interface is down (adminCfgChange) in N5K

[John Gill]

Erlend,
This is buggy behavior, you may be able to get the port back up with a 
shut/no shut.  I don't see an exact match in known bugs, but do you have 
the ability to file a TAC case?  If not, I can still help by gathering 
some debugs with you.

Were you doing this configuration while the peer-link was down or 
initializing?

Can you check the mts message queue?  show system internal mts buffers 
detail

Regards,
John Gill
cisco

On 11/4/11 7:07 AM, Erlend Røsok wrote:
>
> I'm trying to bring up two interfaces under config sync mode in a redundant N5K system running version 5.0(3)N2(2).
>
> The FEX modules have one uplink to each of the N5K.
>
>
> 1) I first try to configure using a port-profile.
>
> This brings it in Administratively down state for some reason. So i try to no shut the interfaces under config sync, but it does not take effect.
>
> 2) I then try to remove everything and configure it without a port-profile.
>
> This brings the interfaces in (adminCfgChange) state. I've tried to google this, but it hasn't given me much information.
>
>
> I have the configuration in a pastebin here: http://pastebin.mozilla.org/1373542
>
>
> Any help would be appreciated.
>
>
> Best Regards
>
> --
> Erlend Røsok
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>