[c-nsp] 7600 SVI QoS

[Ghassan.khalil]

Actually I do not have the command applied as I am using a L3 interface vlan, i believe that the "'mls qos vlan-based" command should be used for L2 policies !? Please advise

On Nov 18, 2011, at 8:03 PM, Andrew Hoyos <hoyosa at gmail.com> wrote:

> On Nov 18, 2011, at 11:10 AM, Ghassan.khalil wrote:
> 
>> Dears,
>> I created some policy-maps with "police" command to limit the speed per interface vlan.
>> I applied two service-policies on "interface vlan" each in different direction:
>> 
>> Interface vlan xx
>> Ip address 10.10.10.1 255.255.255.248
>> service-policy in 1M-policy-IN 
>> service-policy out 1M-policy-OUT 
>> 
>> the result is that only the outbound policy is working and the traffic is being limited to the 1M speed which means I can only control the downlink traffic of my customers.
>> I have another 7606 router in which I tested and the results were the same.
> 
> 
> Do you have 'mls qos vlan-based' on the actual physical interfaces / trunk? 
> 
> --
> Andrew Hoyos
> hoyosa at gmail.com
> 
> 
>