[c-nsp] Low-cost rate-shaping/policing switch

[Mark Tinka]

On Sunday, September 11, 2011 11:45:46 AM Frank Bulk wrote:

> What is the lowest-cost Cisco *switch* that does
> rate-limiting on the egress and policing on the ingress,
> on a per-port basis?

My guess is that would be the ME3600X/3800X, since it 
supports egress policing.

However, do note that egress policing, which has appeared 
for the first time on this platform in IOS 15.1(2)EY, is 
currently limited to policing on egress for Priority 
traffic/queues. I've already contacted our SE to ensure 
egress policing is supported for all traffic/queue types, 
and will wait to see when that happens.

I know most classic switches don't support egress policing 
(some do egress shaping), but I can't be really sure. The 
same goes for Juniper's EX switches, although they really 
aren't in the same league as the ME3600X/3800X I'm 
mentioning here.

Would suggest you check with your SE.

Cheers,

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20110911/1d2d4907/attachment.pgp>