[c-nsp] 7200 DSCP-to-EXP Mapping

Vitkovsky, Adam avitkovsky at emea.att.com
Mon Sep 19 09:12:36 EDT 2011


Yes please I was able to use the qos-groups with the 15. code


adam

-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
Sent: Monday, September 19, 2011 2:34 PM
To: Vitkovsky, Adam; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 7200 DSCP-to-EXP Mapping

Adam,

> Speaking of pipe modes :)
> 
> I also failed to use the pipe mode with 12.2.33 SR codes
> As I was not able to use the qos-groups to keep track of the EXP value
on
> the egress PE
> So on 7200s I pretty much got stuck with a short pipe mode and "set
mpls-exp
> imposition" at the ingress PE

hmm, not 100% sure, haven't worked on 7200 QoS in a while, but feature
navigator doesn't show "MPLS QoS - DiffServ Tunnel Mode Support" on 7200
in 12.2SR train. can you check another release train (for example
15.1S)?

	oli 



More information about the cisco-nsp mailing list