[c-nsp] 3550, 3750, ME3400 storage of current sdm template and system mtu

[Matt Addison]

flash:/env_vars

Afaik private-config is only for private key storage.

Sent from my iPad

On Jun 14, 2012, at 4:57, Michele Bergonzoni <bergonz at labs.it> wrote:

> Anybody knows where does a 3550, 3750 or 3400 store the information about:
>
> - sdm template at next boot
> - system mtu (inc. jumbo and routing) at next boot
>
> I ask because I just realized that backing up image, startup-config and letting rancid do its work are not enough to completely restore a switch in case of hardware failure. I did some "sh boot", "more" on files I found in the flash and nvram, but I cannot find this info. Maybe it is in the private-config.text, which is unreadable (why?).
>
> I am going to add "sh sdm prefer" and "sh system mtu" to rancid, but I wonder why didn't they simply include it in the config and save me some troubleshooting.
>
> If you know more configuration parameters that are not stored in the config, or you know the logic behind this, please let me know.
>
> Regards,
>                Bergonz
>
>
> --
> Ing. Michele Bergonzoni - Laboratori Guglielmo Marconi S.p.a.
> Phone:+39-051-6781926 e-mail: bergonz at labs.it
> alt.advanced.networks.design.configure.operate
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/