[c-nsp] CRC errors on fastethernet interface

[Nick Hilliard]

On 26/11/2012 17:57, Mikael Abrahamsson wrote:
> PA-FE and IO-FE does afaik, only support 100 meg (not 10 meg) and only half
> and full duplex, not autoneg.

i could never understand this.  the pa-fe and the io-fe both used DEC tulip
chips, which were perfectly capable of 10/100, hd/fd.  obviously Cisco
deliberately didn't support this in software, but it was never clear why.

Nick