[c-nsp] ipodwdm - asr 9000

Aaron aaron1 at gvtc.com
Tue Apr 2 12:03:57 EDT 2013


http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r3.9/interfac
es/configuration/guide/hc39dwdm.pdf

 

I haven't got this working and this is my first attempt.in that document it
shows under the controller config that network port id and network
connection id are different . is that true?

 

I'm looking for a basic config for making (2) asr9000's talk to each other
over a ten gige interface using dwdm tuneable/colored optics. using
wavelength 53

 

Any assistance is appreciated

 

Here's what I have currently.. Strangely I'm seeing one-way arp.  Any ideas?

 

RP/0/RSP0/CPU0:9k-1# sh run controll dwdm 0/0/0/0

Tue Apr  2 10:51:02.659 CDT

controller dwdm0/0/0/0

wavelength 53

network connection id 0/0/0/0

network port id 0/0/0/0

admin-state in-service

!

 

RP/0/RSP0/CPU0:9k-1#sh run int ten 0/0/0/0

Tue Apr  2 10:51:06.537 CDT

interface TenGigE0/0/0/0

description testing colored dwdm optics to 9k-2 Te0/1/0/1

ipv4 address 1.1.1.1 255.255.255.252

!

 

RP/0/RSP0/CPU0:9k-1#

RP/0/RSP0/CPU0:9k-1#sh arp ten 0/0/0/0

Tue Apr  2 10:51:17.416 CDT

 

----------------------------------------------------------------------------
---

0/0/CPU0

----------------------------------------------------------------------------
---

Address         Age        Hardware Addr   State      Type  Interface

1.1.1.1         -          6c9c.ed18.1c68  Interface  ARPA  TenGigE0/0/0/0

1.1.1.2         00:09:15   04c5.a4e2.2e2d  Dynamic    ARPA  TenGigE0/0/0/0

RP/0/RSP0/CPU0:9k-1#

 

*****************************************************************

 

RP/0/RSP0/CPU0:9k-2#sh run controller dwdm 0/1/0/1

Tue Apr  2 10:48:38.691 CDT

controller dwdm0/1/0/1

wavelength 53

network connection id 0/1/0/1

network port id 0/1/0/1

admin-state in-service

!

 

RP/0/RSP0/CPU0:9k-2#sh run int ten 0/1/0/1

Tue Apr  2 10:48:43.742 CDT

interface TenGigE0/1/0/1

description testing colored dwdm optics to 9k-1 Te0/0/0/0

ipv4 address 1.1.1.2 255.255.255.252

!

 

 

RP/0/RSP0/CPU0:9k-2#ping 1.1.1.1

Tue Apr  2 10:50:01.234 CDT

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

..U..

Success rate is 0 percent (0/5)

 

RP/0/RSP0/CPU0:9k-2#sh arp ten 0/1/0/1

Tue Apr  2 10:50:11.962 CDT

 

----------------------------------------------------------------------------
---

0/1/CPU0

----------------------------------------------------------------------------
---

Address         Age        Hardware Addr   State      Type  Interface

1.1.1.1         -          0000.0000.0000  Deleted    ARPA  TenGigE0/1/0/1

1.1.1.2         -          04c5.a4e2.2e2d  Interface  ARPA  TenGigE0/1/0/1

RP/0/RSP0/CPU0:9k-2#

 

Aaron

 



More information about the cisco-nsp mailing list