[c-nsp] BGP4 MIB support on IOS 12.4

[Nick Hilliard]

On 18/02/2013 10:16, HahnC at t-systems.com wrote:
> I have an old Cisco which I plan to use as internal BGP route collector
> using IOS 12.4(23b) Enterprise Plus. Cisco MIB site claims that the
> image supports Cisco Enterprise BGP4 MIB, but an snmpwalk for
> 1.3.6.1.4.1.9.9.187 returns nothing (yes, a "show bgp ipv6 unicast"
> returns something ;-). So I'm not sure how reliable the information on
> the Cisco MIB site is.

> Anyone out there has a recommendation for a 12.4. image which supports
> this MIB?

It's not supported on 12.4 - you'll need to move to vanilla IOS 15.2(4)S /
15.2(3)T (or IOS XR 3.4.0 if you're on an XR platform):

> router bgp xxx
>  neighbor 2001::1 remote-as 64512
>  address-family ipv6
>   neighbor 2001::1 activate

leads to:

> % snmpwalk -v 2c -c public 192.168.3.1 .1.3.6.1.4.1.9.9.187.1.2.7
> SNMPv2-SMI::enterprises.9.9.187.1.2.7.1.3.20.16.32.1.0.0.0.0.0.0.0.0.0.0.0.0.0.1.2.1 = STRING: "IPv6 Unicast"

w000t, finally!

Nick