[c-nsp] IPv6 Deployment / 6PE

[Mikael Abrahamsson]

On Fri, 21 Jun 2013, Ahmed Hilmy wrote:

> Dear Friends,
> I am working on IPv6 deployment at our Backbone.
> Our network design is as below:
>
> PEs --- MP-BGP ---RR ( address-family vpnv4 )
> RR------ BGP-----IGW  ( address-family ipv4  )
>
> what i understand is :
>
> - Add address family IPv6 at PEs :
> address-family ipv6
>  neighbor x.x.x.x activate    ( x.x.x.x is IPv4 address of RR )
>  neighbor x.x.x.x send-community both
>  exit-address-family

Excellent document from cisco on the matter:

<http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_data_sheet09186a008052edd3.html>

You need "send-label".

-- 
Mikael Abrahamsson    email: swmike at swm.pp.se