[c-nsp] Rancid causing reload SUP2T 12.2.50-SY3

[Tammy A Wisdom]

It happened as rancid logged out I believe. 
Tammy


Sent from my iPhone

On Mar 26, 2013, at 13:04, heasley <heas at shrubbery.net> wrote:

> Tue, Mar 26, 2013 at 12:53:47PM -0600, Brielle Bruns:
>> On 3/26/13 10:19 AM, Peter Kranz wrote:
>>> Had a 6506-E running redundant Sup2T's perform a failover from ACTIVE to HOT
>>> STANDBY yesterday with nothing showing in the logs right after the hourly
>>> RANCID collection completed. Running
>>> s2t54-advipservicesk9-mz.SPA.122-50.SY3.bin
>>> 
>>> Anyone seen this?
>> 
>> Rancid did the same thing to our 7500 series with a RSP8 and RSP16 on 
>> IOS 12.3 or 12.4 (forget which specifically).  Never did track down why 
>> it was doing that.
> 
> I've seen it before; I do not recall which command(s) caused the problem,
> but it was a memory leak that would, over a few days, cause the sup to
> crash.  ISTR it producing logs that made the symtom obvious.  your problem
> may be something different and exciting.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/