[c-nsp] DHCP Over Xconnect

[Mohammad Khalil]

Hi Nicolas
I am working on GNS3 and I have just reloaded my topology and it worked fine :) it drove me crazy !

Date: Fri, 8 Nov 2013 17:11:56 +0100
Subject: Re: [c-nsp] DHCP Over Xconnect
From: liste at karp.fr
To: eng_mssk at hotmail.com
CC: cisco-nsp at puck.nether.net

Hi Mohammad,

I think you did because it should work :)  What about the "show xconnect all" ? And btw, if you put a static IP on the remote end of the tunnel, are you able to ping the DHCP server ? 

BR,# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# - -   Nicolas KARP# - -   Network and Security Engineer
# - -    Linkedin :  http://www.linkedin.com/in/nicolaskarp 
# - -    Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp 
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



2013/11/8 Mohammad Khalil <eng_mssk at hotmail.com>

Hi all

I have established xconnect between two PE routers using sub interfaces toward the CEs

The xconnect is up as shown in the show mpls l2transport summary

one of the CEs is acting as DHCP server and the other one is acting as a client but the DHCP binding did not take place , am i missing something ?



BR,

Mohammad



_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/