[c-nsp] IP nat translation

[Renelson Panosky]

How do i restore IP nat and the IP NAT translation table ? they are not
showing on my IP nat translation..

here are my configuraation..
ip nat inside source list 1 interface GigabitEthernet0/1 overload

route-map NAT_1 permit 1
 match ip address 1
 match interface GigabitEthernet0/1
!
access-list 1 permit 10.10.0.0 0.0.255.255

sho ip nat translation
Pro Inside global      Inside local       Outside local      Outside global
udp 164.XX.XX.XX:12134 10.XX.XX.X:12134   10.XX.XX.XX:12134
10.XXX.XX.XX:12134

the translation would show on the table for sometimes and dispear..