[c-nsp] ASR1001 RAM

[Rich Lewis]

Those memory figures below are from an ASR1001 running IOS-XE 03.09.00.S / 15.3(2)S.

What was the image that you ran into memory issues with? Just so I know to avoid it! :-)


> -----Original Message-----
> From: Gustav UHLANDER [mailto:gustav.ulander at steria.se]
> Sent: 09 August 2014 23:33
> 
> Yea that depends on sw version.
> We ran into the issue when upgrading to a newer image on routers that receive full
> feeds from upstream.
> Sent it to tac and they said it was memory issue.
> 
> Skickas med OWA för iPad
> ________________________________________
>> Från: cisco-nsp <cisco-nsp-bounces at puck.nether.net> för Rich Lewis
>> <RLewis at sis.tv>
>> Skickat: den 6 augusti 2014 21:30:55
>> 
>> 
>> FWIW, we have full tables on an ASR1001 with 4GB RAM, and with add-path
>> enabled:
>> 
>> 503890 network entries using 124964720 bytes of memory
>> 982424 path entries using 110031488 bytes of memory BGP using 281251490 total
>> bytes of memory
>> 
>> I guess it depends what else you're doing, but 4GB would seem ample on the face
>> of it.


**********************************************************************

Satellite Information Services Limited. Registered Office: Whitehall Avenue, Kingston, Milton Keynes, Buckinghamshire, MK10 0AX. Company No. 4243307 

The information in this email (which includes any files transmitted with it) is confidential and is intended for the addressee only. Unauthorized recipients are required to maintain confidentiality. If you have received this email in error please notify the sender immediately, destroy any copies and delete it from your computer system. 

**********************************************************************